City of Philadelphia - File #: 080953

• File #: 080953
• Version: 0
• Type: Bill
• Status: LAPSED
• File created: 12/11/2008
• In control: Committee on Licenses and Inspections
• Title: Amending Subcode "P" (The Philadelphia Plumbing Code) of Title 4 of The Philadelphia Code ("The Philadelphia Building Construction And Occupancy Code") by providing for the use of ABS plastic pipe and PVC plastic pipe, under certain terms and conditions.
• Sponsors: Councilmember Clarke
• Indexes: PLUMBING CODE
• Code sections: 4-200.0 - TEXT OF SUBCODES, SUBCODE P - (THE PHILADELPHIA PLUMBING CODE), Title 4 - THE PHILADELPHIA BUILDING CONSTRUCTION AND OCCUPANCY CODE

Date	Ver.	Action By	Action	Result	Tally
3/18/2009	0	Committee on Licenses and Inspections	HEARING NOTICES SENT
3/18/2009	0	Committee on Licenses and Inspections	HEARING HELD
3/18/2009	0	Committee on Licenses and Inspections	RECESSED
12/11/2008	0	CITY COUNCIL	Referred
12/11/2008	0	CITY COUNCIL	Introduced	Pass

Title

Amending Subcode “P” (The Philadelphia Plumbing Code) of Title 4 of The Philadelphia Code (“The Philadelphia Building Construction And Occupancy Code”) by providing for the use of ABS plastic pipe and PVC plastic pipe, under certain terms and conditions.

Body

THE COUNCIL OF THE CITY OF PHILADELPHIA HEREBY ORDAINS:

Section 1.       Subcode “P” of Title 4 of The Philadelphia Code is hereby amended as follows:

TITLE 4.  THE PHILADELPHIA BUILDING

CONSTRUCTION AND OCCUPANCY CODE

*      *      *

CHAPTER 4-200.0.  TEXT OF SUBCODES

*      *      *

SUBCODE “P”

(THE PHILADELPHIA PLUMBING CODE)

*      *      *

CHAPTER 2

RULES AND DEFINITIONS

SECTION P-201.0  USE OF ABS AND PVC PLASTIC PIPING

P-201.1   Use Of ABS and PVC Plastic Piping.   Notwithstanding any provision of this Code or the regulations adopted thereunder to the contrary, ABS and PVC plastic may be used for the following to the full extent permitted by the International Code Council International Plumbing Code:

1.      Soil and waste piping for drainage systems within any building;    

1. Water piping;      

1. Rainwater conductors and storm drain piping;

1. Vent piping; and

1. Underground and exterior waste piping.

P-201.2   Installation Of ABS and PVC Plastic Piping.   Notwithstanding any provision of this Code or the regulations adopted thereunder to the contrary, rules applicable specifically to the installation of ABS and/or PVC plastic piping shall not apply, except to the extent  such rules are required by the International Code Council International Plumbing Code.

SECTION P-202.0 GENERAL DEFINITIONS.

*      *      *

______________________

Explanation:

[Brackets] indicate matter deleted.

Italics indicate new matter added.

End

1